BODY RECOVERY TRAINING MANIKINS
Realistic in size and weight; combined with a face and hair, this manikin is eerily close to a real body in an underwater environment.
A pre-established protocol is essential for victim retrieval - the body recovery manikin was predominately designed to aid Police dive teams train to recover bodies from any inland waters or under ice.
The manikin is a variant of the popular Water Rescue manikin - but instead of floating, it sinks. By balancing the buoyancy against the ballast the manikin weighs 50kg on land but only 10kg under water.
The body recovery models are visible to sonar devices - the gallery image was taken using a Cmax CM2 Side Scan and Konsberg Sector Scan Sona.
IDEAL FOR THE FOLLOWING TRAINING SCENARIOS:
Police dive teams training to recover bodies from inland waterways and from under ice. A variant of our popular Man Overboard manikin but is designed to sink instead of float.
SPECIAL MATERIALS:
Carcass constructed from nylon mesh. High density polypropylene webbing (25mm rated to 207 Kg, 50mm rated to 440Kg) SOLAS reflective tape compliant with US Department of Transportation specification USCG 46 CFR, section 164.018, and International Maritime Organisation (IMO) resolution A.658(16). Nonabsorbent closed cell foam – water absorption: 1 Day <0.1 (DIN 53428 1986) 28 Days < 0.5% VOL. Overall constructed from the same material used in Police ballistic/stab vests (conforms to OEKO-TEX® Standard 100, BS EN ISO 12947-2 & 14116: 2008).
FEATURES & BENEFITS
- Anatomically correct weight distribution allows for realistic body 'bagging' as part of training exercises.
- This manikin will easily withstand a fall of 5 - 6 metres into water with no damage - they are tough!
- Constructed using a H/D reinforced Nylon mesh for the carcass and non-absorbent closed cell foam for buoyancy - mesh allows water to flood into the body to allow it to sink and out as it is being recovered.
- Mesh allows for ventilation when the manikin hung up to dry - a polypropylene loop to the back of the carcass allows the manikin to be lowered into position or hung up to dry.
- The addition of a realistic face and a wig enable easier/quicker identification of the body in poor viability when the search is by touch only.
- Polyethylene strips running from the shoulders to the knees allow flexibility but prevent the manikin from bending in half when using stretchers or recovery devices.
- Replaceable coveralls and boots are easily replaceable and greatly extend the life of the manikin
NOT SUITED FOR:
• Use in temperatures above 100°C or flashover scenarios – See our Fire House manikin.
Body Recovery Data Sheet